座舱盖作动筒接管嘴断裂研究及施胶粘接密封改进

马良冬, 刘震, 任宗强, 皮月亮, 任义志, 倪伟, 欧阳康

马良冬, 刘震, 任宗强, 皮月亮, 任义志, 倪伟, 欧阳康. 座舱盖作动筒接管嘴断裂研究及施胶粘接密封改进[J]. 机械研究与应用, 2024, 37(3): 111-114. DOI: 10.16576/j.ISSN.1007-4414.2024.03.031
引用本文: 马良冬, 刘震, 任宗强, 皮月亮, 任义志, 倪伟, 欧阳康. 座舱盖作动筒接管嘴断裂研究及施胶粘接密封改进[J]. 机械研究与应用, 2024, 37(3): 111-114. DOI: 10.16576/j.ISSN.1007-4414.2024.03.031
MA Liang-dong, LIU Zhen, REN Zong-qiang, PI Yue-liang, REN Yi-zhi, NI Wei, OUYANG Kang. Study on the Fracture of Nozzle of Cockpit Cover Actuating Cylinder and Improvement of Adhesive Bonding Seal[J]. Mechanical Research & Application, 2024, 37(3): 111-114. DOI: 10.16576/j.ISSN.1007-4414.2024.03.031
Citation: MA Liang-dong, LIU Zhen, REN Zong-qiang, PI Yue-liang, REN Yi-zhi, NI Wei, OUYANG Kang. Study on the Fracture of Nozzle of Cockpit Cover Actuating Cylinder and Improvement of Adhesive Bonding Seal[J]. Mechanical Research & Application, 2024, 37(3): 111-114. DOI: 10.16576/j.ISSN.1007-4414.2024.03.031

座舱盖作动筒接管嘴断裂研究及施胶粘接密封改进

详细信息
    作者简介:

    马良冬(1990-),男,江苏徐州人,硕士研究生,工程师、注册安全工程师,主要从事飞机操纵、液压、救生系统等方面的产品质量可靠性研究工作。

  • 中图分类号: V267

Study on the Fracture of Nozzle of Cockpit Cover Actuating Cylinder and Improvement of Adhesive Bonding Seal

  • 摘要: 为解决某装备救生系统座舱盖作动筒液压腔接管嘴断裂导致的座舱盖下降问题,该文对产品的机上安装受力状态、产品工作原理、接管嘴无损检测、失效情况等展开分析,采取有限元仿真模拟和故障复现等手段确定了断裂原因为外力过载。结合故障原因以及断裂后引发的质量安全风险,制定了一系列措施,以杜绝因误操作等因素导致的接管嘴断裂的情况,确保产品性能稳定可靠。
    Abstract: In order to solve the cabin cover descent problem caused by fracture of the nozzle in the hydraulic chamber of the operating cylinder in a certain equipment lifesaving system, research and analysis on the installation force state, the working principle of the product, non-destructive detection and judgment of the nozzle, and the failure analysis are conducted. Through the finite element simulation and the failure recurrence, it is determined that the fracture reason is the external force overload. Combined with the cause of failure and the severity of quality and safety caused by the fracture, the related measures to prevent the nozzle from breaking due to misoperation and other factors are worked out so as to ensure the stability and reliability of product performance.
  • [1] 张三展,贺发国.机座舱盖系统分流活门典型故障分析与改进.2020中国航空工业技术装备工程协会年会论文集,2020:389-392.
    [2]

    Zhang T,Cai W,Hu M. Configuration Design of a Cruise Ship Lifesaving System Based on a Genetic Algorithm[J]. Journal of Coastal Research,2023(3):569-581.

    [3] 柒文英.大型循环水泵主轴超声波探伤方法分析和探讨[J].工程机械,2023,54(9):27-31+8.
    [4] 李一兵.磁粉探伤技术在压力容器焊接接头缺陷检测中的应用[J].中国设备工程,2023(16):181-183.
    [5] 丁旭,王方方,王皓煜,等.用于三维电镜及X射线显微镜的完整小鼠耳蜗块染方法[J].听力学及言语疾病杂志,2020,28(3):321-325.
    [6] 郭涛,黄超,姜涛.平尾终点开关传动轴断裂分析[J].航空维修与工程,2019(10):88-90.
    [7] 杨振华,高磊,陈泊希,等.飞机液压导管裂纹分析与改进措施[J].液压气动与密封,2023,43(9):118-123.
    [8] 马中原,李政广,秦海勤,等.某型发动机导管断裂原因分析[J].航空维修与工程,2023(8):48-50.
    [9] 刘刚,杜爱国,王威琦,等.10MnNi2MoV低合金钢管接头裂纹性质分析[J].焊接,2023(7):59-64.
    [10] 马良冬,从德胜,鲍益东,等.O形密封圈高压咬伤问题研究及改进[J].粘接,2023,50(3):1-4.
    [11] 孙家冬,杨巍,康凯.0Cr16Ni6热轧退火钢螺纹定位销断裂原因[J].理化检验-物理分册,2022,58(10):50-53.
    [12] 郝地龙,何霞,王国荣,等.整体式卡瓦断裂仿真及实验研究[J].应用力学学报,2020,37(4):1641-1648+1866.
    [13] 王健,夏俊勇,罗勇欢,等.桥梁减隔震钢支座剪力销剪断性能试验研究[J].中外公路,2021,41(4):142-144.
    [14] 晓红.不同胶粘剂粘接击弦机弦槌综合性能研究[J].粘接,2023,50(9):23-26.
    [15] 洪秀岩.胶接技术在铝合金运动训练器材接头中的应用及性能研究[J].粘接,2023,50(5):12-16.
    [16] 董超群,王陆阳.HM109-1密封剂应用工艺研究[J].黑龙江科技信息,2016(31):17-18.
计量
  • 文章访问数:  8
  • HTML全文浏览量:  0
  • PDF下载量:  4
  • 被引次数: 0
出版历程
  • 收稿日期:  2023-10-26
  • 网络出版日期:  2024-07-02

目录

    /

    返回文章
    返回
    x 关闭 永久关闭