Advanced Search

column
Derivation of the Mode Shape Functions for a Three-span Cantilever Beam
WANG Zhi-lin, LU Li
2026, 39(2): 1-3, 8. DOI: 10.16576/j.ISSN.1007-4414.2026.02.001
Abstract PDF
Study on the Influence of Bearing Stiffness on the Vibration Characteristics of Scroll Compressor Rotor System
JIANG Qiang-qiang, DANG Jiang-wei, XU Mao-qin, YU Jun-long, LUO Xiao, ZHANG Li, HE Yuan-yuan, ZHANG Guo-peng
2026, 39(2): 4-8. DOI: 10.16576/j.ISSN.1007-4414.2026.02.002
Abstract PDF
Optimize the Fault Diagnosis of Rolling Bearings Using Stochastic Resonance and Extreme Learning Machines
WEI Xiao-peng
2026, 39(2): 9-11, 15. DOI: 10.16576/j.ISSN.1007-4414.2026.02.003
Abstract PDF
Finite Element Analysis of an Overhead Traveling Movable Formwork System
ZHAO Xin, WANG Bin-hua, MI Jia-chuan
2026, 39(2): 12-15. DOI: 10.16576/j.ISSN.1007-4414.2026.02.004
Abstract PDF
Research and Application of the Lifting Guardrail Design for the Orchestra Pit with Linear Guide Rails
SUN Zhao-jin
2026, 39(2): 16-18, 22. DOI: 10.16576/j.ISSN.1007-4414.2026.02.005
Abstract PDF
Study on Wind Resistant Stability of Self-standing Antenna Lifting Rod
JIANG Guo-hui, JIANG Yu
2026, 39(2): 19-22. DOI: 10.16576/j.ISSN.1007-4414.2026.02.006
Abstract PDF
Research on Geometric Parameter Measurement Method for a Flow Deflector Device
KONG Ling-zhi, HUANG Xing-hui
2026, 39(2): 23-27, 32. DOI: 10.16576/j.ISSN.1007-4414.2026.02.007
Abstract PDF
Theoretical Calculation and Experimental Study of Torsional Stiffness of Rubber Linkage Type Wind Power Coupling
PENG Hao-kun, CHEN Bin, HU Wei-hui, HU Chang, CAO Yong, TAN Jing-jing
2026, 39(2): 28-32. DOI: 10.16576/j.ISSN.1007-4414.2026.02.008
Abstract PDF
Study on the Correlation between the Grease Film Thickness and Fatigue Life of Bearings
WANG Yan-shuang, XUE Lian-jin, FENG Zhi-wei, ZHANG Ming-yu, ZHANG Shu-yu
2026, 39(2): 33-37, 40. DOI: 10.16576/j.ISSN.1007-4414.2026.02.009
Abstract PDF
Structural Fatigue Strength Analysis and Experimental Research for Frame of Electric Three-Wheeled Sanitation Vehicle
WANG Lei, WAN Yi-pin, RU Bo
2026, 39(2): 38-40. DOI: 10.16576/j.ISSN.1007-4414.2026.02.010
Abstract PDF
Simulation Analysis and Experimental Research on Key Connection Structure Strength of Electric Three Wheel Cleaning Vehicle
ZHANG Wei, WAN Yi-pin, ZHANG Jia-le
2026, 39(2): 41-42, 45. DOI: 10.16576/j.ISSN.1007-4414.2026.02.011
Abstract PDF
Analysis of the Influence of Oxide on the Mechanical Properties of 27SiMn Hot-Rolled Seamless Pipe after Heat Treatment
FAN Yong-bin, LI Ya-juan, LI Heng-qian
2026, 39(2): 43-45. DOI: 10.16576/j.ISSN.1007-4414.2026.02.012
Abstract PDF
Finite Element Analysis of MSS32 Mobile Mold Cantilever Crane
WANG Yi-fan, WANG Bin-hua, MI Jia-chuan
2026, 39(2): 46-48. DOI: 10.16576/j.ISSN.1007-4414.2026.02.013
Abstract PDF
A Study on Stability Prediction of the Milling System in Bevel Gear Milling Machines based on an Improved Full-Discretization Method
LUO Jing, LIANG Meng-yang
2026, 39(2): 49-55, 60. DOI: 10.16576/j.ISSN.1007-4414.2026.02.014
Abstract PDF
A Method for Customizing Load-Displacement Curves based on the Hollow-Out Plate-Roller-Spring System
YUAN You-chao, YUAN Jiang-hong
2026, 39(2): 56-60. DOI: 10.16576/j.ISSN.1007-4414.2026.02.015
Abstract PDF
Design and Manufacturing Process of Movable Small-Skid Marine Modular Drilling Rig
REN Zong-liang, ZHU Ben-wen, WEI Shuang-hui, LI Yan-jun, MIAO Bo, LI Xiao-dong, LIU Han-dong, DOU Qiao, ZHANG Lin-shui
2026, 39(2): 61-64. DOI: 10.16576/j.ISSN.1007-4414.2026.02.016
Abstract PDF
Optimization Design and Application of Stabilizer for Directional Measuring Instrument
JIAN Guang-xiao, LI Yang, WANG Jiao-jiao, MA Zhi-liang, WANG Hai-wang, NIE Lei
2026, 39(2): 65-68. DOI: 10.16576/j.ISSN.1007-4414.2026.02.017
Abstract PDF
Functional and Structural Design Analysis of Rail Profiles for Flexible Modular Cranes
XU Hao-jie, MA Xin-bo, LIU Si-qi, CAO Can-can, DONG Yi-tong
2026, 39(2): 69-70, 74. DOI: 10.16576/j.ISSN.1007-4414.2026.02.018
Abstract PDF
The Large Antenna Structure Design based on Multi-objective Optimization Method
SHI Hai-tao, ZHANG Zi-yu, WANG Zhi-hai, ZHANG Gen-xuan
2026, 39(2): 71-74. DOI: 10.16576/j.ISSN.1007-4414.2026.02.019
Abstract PDF
Study on Compilation Method of Load Spectrum for Main Bearing of Large Diameter Shield Machine
YANG Fan
2026, 39(2): 75-78. DOI: 10.16576/j.ISSN.1007-4414.2026.02.020
Abstract PDF
The Design of Automated Guided Vehicle for Coiled Material Transportation
LIU Ying-nan
2026, 39(2): 79-82, 85. DOI: 10.16576/j.ISSN.1007-4414.2026.02.021
Abstract PDF
Finite Element Analysis and Optimization of Equipment Lifting Structure Strength based on Hypermesh and Abaqus
GONG Wang, LIU Yi, HUANG Chao, SHI Gang
2026, 39(2): 83-85. DOI: 10.16576/j.ISSN.1007-4414.2026.02.022
Abstract PDF
Structural Design of Welding System for Automobile Pipe Fittings
YANG Run, LI Xi-han, DING Kun-ying, DONG Zi-yu, WEI Yu-lan, LI Bing
2026, 39(2): 86-88, 92. DOI: 10.16576/j.ISSN.1007-4414.2026.02.023
Abstract PDF
Design Analysis of Wheel-Foot Conversion Bionic Spider Robot
ZHANG Si-yao, ZHAO Yue
2026, 39(2): 89-92. DOI: 10.16576/j.ISSN.1007-4414.2026.02.024
Abstract PDF
Study on Flow Field Simulation and Design Improvement of First Reactor of Polypropylene Unit
CUI Jian-hang, MA Tian-xin, MA Rui
2026, 39(2): 93-96. DOI: 10.16576/j.ISSN.1007-4414.2026.02.025
Abstract PDF
Design and Implementation of Automatic CNC Tool Loading and Unloading Machine based on Machine Vision
TANG Dong, ZHU Li-peng, JIANG Xue, FANG Ke
2026, 39(2): 97-100, 103. DOI: 10.16576/j.ISSN.1007-4414.2026.02.026
Abstract PDF
Design and Performance Test of a Small Energy Drop Hammer Impact Test Device
LIU Jun, ZHANG Ying-hui, ZHUANG Su-kai, ZHANG Cai-ni, ZHU Ming-hui, ZHANG Rong, WANG Jia-hui, WANG Zhi-yuan
2026, 39(2): 101-103. DOI: 10.16576/j.ISSN.1007-4414.2026.02.027
Abstract PDF
Design of Power Quality Control Device for Coalbed Methane Well Power Supply System
DING Kun
2026, 39(2): 104-106. DOI: 10.16576/j.ISSN.1007-4414.2026.02.028
Abstract PDF
Research on the Characteristics of Photovoltaic Power Generation System based on Inverter Modeling
FENG Ruo-heng
2026, 39(2): 107-109. DOI: 10.16576/j.ISSN.1007-4414.2026.02.029
Abstract PDF
Design and Application of Collaborative Control System Between Scraper Conveyor and Shearer
LI Hai-feng
2026, 39(2): 110-113. DOI: 10.16576/j.ISSN.1007-4414.2026.02.030
Abstract PDF
Analysis of Wear in the Middle Groove of Mining Scraper Conveyor and Measures to Reduce Wear
ZHU Zeng, REN Jia-min, DOU Zi-long
2026, 39(2): 114-116. DOI: 10.16576/j.ISSN.1007-4414.2026.02.031
Abstract PDF
FatigueAnalysis and Optimization of the Head Frame of Coal Mine Belt Conveyor
YANG Zhi-guang
2026, 39(2): 117-119. DOI: 10.16576/j.ISSN.1007-4414.2026.02.032
Abstract PDF
Design and Application Analysis of High Voltage Comprehensive Protection Device for Mine Power Supply System
WANG Xing-hua
2026, 39(2): 120-122, 125. DOI: 10.16576/j.ISSN.1007-4414.2026.02.033
Abstract PDF
Fatigue Life Analysis and Optimization of Idler Rollers for Coal Mine Belt Conveyors
SHI Kang-jie
2026, 39(2): 123-125. DOI: 10.16576/j.ISSN.1007-4414.2026.02.034
Abstract PDF
Research on Optimization of Electric Control System for Mine Belt Conveyor
LUO Jiang
2026, 39(2): 126-128. DOI: 10.16576/j.ISSN.1007-4414.2026.02.035
Abstract PDF
Exploration of Structural Fixation Method for a Special Electrical Device
YAN Long, WU Mei-na, WANG Min, YU Zi-zhen
2026, 39(2): 129-131. DOI: 10.16576/j.ISSN.1007-4414.2026.02.036
Abstract PDF
Innovative Research on Intelligent Electronic Control Technology in the Chassis Systems of New Energy Vehicles
WU Meng
2026, 39(2): 132-135. DOI: 10.16576/j.ISSN.1007-4414.2026.02.037
Abstract PDF
Non Destructive Testing of Welding Defects in Railway Electric Locomotive Body based on Array Eddy Current Technology
TAO Xiao-hua
2026, 39(2): 136-138, 143. DOI: 10.16576/j.ISSN.1007-4414.2026.02.038
Abstract PDF
Study on Heat Treatment Process of CuCr Alloy
ZHANG Long, TAN Yu-hao, DUAN Wang-chun, GAO Bin
2026, 39(2): 139-143. DOI: 10.16576/j.ISSN.1007-4414.2026.02.039
Abstract PDF
The Study on the Effect of Surface Oxidation of UO2 Powder on Its Suppression and Sintering Properties
WU Gen-jiu, WANG Bo
2026, 39(2): 144-146, 150. DOI: 10.16576/j.ISSN.1007-4414.2026.02.040
Abstract PDF
Research and Analysis on Surface Protection of Bolts using DLC Film Coatings
SUN Qian
2026, 39(2): 147-150. DOI: 10.16576/j.ISSN.1007-4414.2026.02.041
Abstract PDF
Analysis of Anti-Vibration Performance of Fixed Partition Distribution Cabinets in IDC
LI Qing
2026, 39(2): 151-154. DOI: 10.16576/j.ISSN.1007-4414.2026.02.042
Abstract PDF
Design of Mobile Vehicle-Mounted Pressure Test System based on the Internet of Things
AN Jing
2026, 39(2): 155-157. DOI: 10.16576/j.ISSN.1007-4414.2026.02.043
Abstract PDF
Design of Control System for Small Household Drying and Ironing Machine based on PLC
YUE Hua, QIU Wei-xing, ZHANG Hua-ping, CHENG Ji-yao, GUO Yong-hao
2026, 39(2): 158-161. DOI: 10.16576/j.ISSN.1007-4414.2026.02.044
Abstract PDF
Research on Key Points Design of Wind Turbine Cover Structure
JIANG Wei, LI Yang, YANG Yang
2026, 39(2): 162-165. DOI: 10.16576/j.ISSN.1007-4414.2026.02.045
Abstract PDF
Research on Deburring Technology for Deep Cross-Hole Flow Channels in Aeronautical Electronic Products
XU Tao, LI Xiao-ming, WANG Li-zhi, LIU Qian-wen, LIANG Min, GAO Ya-cong, XIAO Jia
2026, 39(2): 166-167, 170. DOI: 10.16576/j.ISSN.1007-4414.2026.02.046
Abstract PDF
Computational Analysis of the Lifting Force of Clamping Friction Overspeed Governor
LIU Yue-jin
2026, 39(2): 168-170. DOI: 10.16576/j.ISSN.1007-4414.2026.02.047
Abstract PDF
Analysis and Application of Processing Technology with Multi-Angle Spatial Features
DONG Zhao-peng, BAI Chang-you, HAN Hai-rui
2026, 39(2): 171-173, 177. DOI: 10.16576/j.ISSN.1007-4414.2026.02.048
Abstract PDF
Research Status on the Structural Design and Welding Technology of Launch Vehicle Propellant Tanks
CHEN Hao, HAN Wei
2026, 39(2): 174-177. DOI: 10.16576/j.ISSN.1007-4414.2026.02.049
Abstract PDF
Review of Laser-Arc Hybrid Heat Source Welding Technology
DING Kun-ying, YANG Run, LI Xi-han, SHEN Yong, WEI Yu-lan, LI Bing
2026, 39(2): 178-182. DOI: 10.16576/j.ISSN.1007-4414.2026.02.050
Abstract PDF
Research on the Current Status and Development Trends of Visual Technologies in Robotic Welding Systems
ZHAI Yan-fei, LIU Qiang
2026, 39(2): 183-187. DOI: 10.16576/j.ISSN.1007-4414.2026.02.051
Abstract PDF
A Review of Motion Error Compensation Methods for Six Degree of Freedom Industrial Collaborative Robots
GUO Qian-rong, WAN Yi-pin, ZHANG Jie, WANG Rui
2026, 39(2): 188-190. DOI: 10.16576/j.ISSN.1007-4414.2026.02.052
Abstract PDF
Development and Application of Convolutional Neural Networks in Industrial Defect Detection
KE Shuai, ZHANG Xiao-hua, YANG Yue, ZHOU Zuo-kun
2026, 39(2): 191-194. DOI: 10.16576/j.ISSN.1007-4414.2026.02.053
Abstract PDF